Follow

Configuring eLPR Axis UI for Plate Reads

1. Select Video Stream. Then under preview select Open

elpr1765pixel.jpg

2. Click the "Show pixel Counter" box and set the width to 150 and height to 75.

elpr1765pixel2.png

To achieve maximum confidence in your plate hits you will want to position a car in the lane of traffic and zoom in and focus on the stationary plate. Then run the car down the lane of traffic a few times at different speeds. This will tell you if you need to zoom in or out. The goal is to have the plate matched up to the edges of the box.

On the Axis Q1765-LE you can toggle the autofocus. While initially fine tuning the camera for plate reads you will set the auto focus on. Once zoomed in on the correct position you will toggle it off.

autofocus.png

On the Camera Settings page you will uncheck Wide Dynamic Range, set the Shutter to Fixed, and 1/2000. 

elprshutterandgain.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments